TPC6602 2004-07-07 1 toshiba transistor silicon pnp epitaxial type TPC6602 high-speed switching applications dc-dc converter applications strobe applications ? high dc current gain: h fe = 200 to 500 (i c = ? 0.2 a) ? low collector-emitter saturation voltage: v ce (sat) = ? 0.19 v (max) ? high-speed switching: t f = 25 ns (typ.) maximum ratings (ta = 25c) characteristics symbol rating unit collector-base voltage v cbo ? 20 v collector-emitter voltage v ceo ? 10 v emitter-base voltage v ebo ? 7 v dc i c ? 2.0 collector current pulse i cp ? 3.5 a base current i b ? 200 ma t = 10 s 1.6 collector power dissipation dc p c (note) 0.8 w junction temperature t j 150 c storage temperature range t stg ? 55~150 c note: mounted on an fr4 board (glass epoxy, 1.6 mm thick, cu area: 645 mm 2 ) electrical characteristics (ta = 25c) characteristics symbol test condition min typ. max unit collector cut-off current i cbo v cb = ? 20 v, i e = 0 ? ? ? 100 na emitter cut-off current i ebo v eb = ? 7 v, i c = 0 ? ? ? 100 na collector-emitter breakdown voltage v (br) ceo i c = ? 10 ma, i b = 0 ? 10 ? ? v h fe (1) v ce = ? 2 v, i c = ? 0.2 a 200 ? 500 dc current gain h fe (2) v ce = ? 2 v, i c = ? 0.6 a 125 ? ? collector-emitter saturation voltage v ce (sat) i c = ? 0.6 a, i b = ? 0.02 a ? ? ? 0.19 v base-emitter saturation voltage v be (sat) i c = ? 0.6 a, i b = ? 0.02 a ? ? ? 1.10 v collector output capacitance c ob v cb = ? 10 v, i e = 0, f = 1 mhz ? 12 ? pf rise time t r ? 50 ? storage time t stg ? 115 ? switching time fall time t f see figure 1 circuit diagram. v cc ? ? 6 v, r l = 10 ? i b1 = ? i b2 = ? 20 ma ? 25 ? ns unit: mm jedec D jeita D toshiba 2-3t1 weight: 0.011 g (typ.)
TPC6602 2004-07-07 2 figure 1 switching time test circuit & timing chart circuit configuration marking 6 5 4 1 2 3 i b2 i b1 20 s output input i b2 i b1 r l v cc duty cycle < 1% part no. (or abbreviation code) h3b a line indicates lead (pb)-free package or lead (pb)-free finish. lot code (month) lot no pin #1 lot code (year) product-specific code
TPC6602 2004-07-07 3 collector current i c (a) base-emitter saturation voltage v be (sat) (v) collector-emitter voltage v ce (v) i c ? v ce collector current i c (a) collector current i c (a) h fe ? i c dc current gain h fe collector current i c (a) v ce (sat) ? i c collector-emitter saturation voltage v ce (sat) (v) collector current i c (a) v be (sat) ? i c base-emitter voltage v be (v) i c ? v be 0 0 common emitter ta = 25c single pulse test ? 0.4 ? 1.2 ? 0.8 ? 2 ? 1.6 ? 1.2 ? 0.8 ? 0.4 i b = ? 2 ma ? 4 ? 6 ? 10 ? 20 ? 40 ? 60 ? 80 ? 0.2 ? 1 ? 0.6 10 10000 1000 100 ? 0.001 ? 0.01 ? 0.1 ? 1 ? 10 common emitter v ce = ? 2 v single pulse test 25 ta = 100c ? 55 ? 0.001 ? 1 ? 0.1 ? 0.01 ? 0.001 ? 0.01 ? 0.1 ? 1 ? 10 common emitter i c /i b = 30 single pulse test 25 ? 55 ta = 100c 0 0 ? 0.4 ? 0.8 ? 1.2 ? 1.6 ? 0.4 ? 1.2 ? 2 ta = 100c common emitter v ce = ? 2 v single pulse test ? 55 25 ? 0.8 ? 1.6 ? 0.001 ? 0.01 ? 0.1 ? 1 ? 10 ? 10 ? 0.1 ? 1 common emitter i c /i b = 30 single pulse test 25 ? 55 ta = 100c
TPC6602 2004-07-07 4 pulse width t w (s) r th ? t w transient thermal resistance r th (j-a) (c/w) collector-emitter voltage v ce (v) safe operating area collector current i c (a) i c max (pulse) * dc operation (ta = 25c) v ceo max i c max ( continuous ) 10 s * 10 ms * 1 ms * 100 ms * ? 0.01 ? 0.1 ? 1 ? 10 ? 100 ? 0.1 ? 1 ? 10 * : single pulse ta = 25c note that the curves for 100 ms * , 10 s * and dc operation * will be different when the devices aren?t mounted on an fr4 board (glass epoxy, 1.6 mm thick, cu area: 645 mm 2 ). these characteristic curves must be derated linearly with increase in temperature. 1 0.001 0.01 0.1 1 10 100 1000 10 1000 curves should be applied in thermal limited area. single pulse ta = 25c mounted on an fr4 board (glass epoxy, 1.6 mm thick, 2 100
TPC6602 2004-07-07 5 ? the information contained herein is subject to change without notice. ? the information contained herein is presented only as a guide for the applications of our products. no responsibility is assumed by toshiba for any infringements of patents or other rights of the third parties which may result from its use. no license is granted by implication or otherwise under any patent or patent rights of toshiba or others. ? toshiba is continually working to improve the quality an d reliability of its products. nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. it is the responsibility of the buyer, when utilizing toshiba products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such toshiba products could cause loss of human life, bodily injury or damage to property. in developing your designs, please ensure that toshiba products are used within specified operating ranges as set forth in the most recent toshiba products specifications. also, please keep in mind the precautions and conditions set forth in the ?handling guide for semiconductor devices,? or ?toshiba semiconductor reliability handbook? etc.. ? the toshiba products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). these toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfuncti on or failure of which may cause loss of human life or bodily injury (?unintended usage?). unintended usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. unintended usage of toshiba products listed in this document shall be made at the customer?s own risk. ? toshiba products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. 030619eaa restrictions on product use
|
